The importance of careful maintenance of stretching robot
發(fā)布日期：2021-10-28 來(lái)源： 作者： 瀏覽量：967
The performance and capability of the stretching robot is easy to verify. In that way, the weighed and packaged raw materials are neatly pushed and placed on the pallet according to the corresponding arrangement. In that way, the palletizing is neat and the machine is qualified. Naturally, in order to ensure this problem, the robot should be able to meet the fundamental conditions of its work, that is, switching power supply circuit and air source.
After connecting the switching power supply circuit of the stretching robot, the supplied air shall also be compressed into the pneumatic system of the connected equipment, and then the condensate in the air filter shall be removed immediately, and the stains on the filter device shall be checked and removed; Check the air flow rate of the barometer indicator and the oil leakage of the oil sprayer and the oil condition in the oil cup. When there are no problems at all levels, the stacking work of the machine can be started. In this process, it will go through three links: adjusting the stacking type, supplying tray and grabbing bags. Problems occur in all links, and the machine has faults. Therefore, it is necessary to carry out analysis and Solutions in an orderly manner. In addition to some basic components, a large number of industrial sensors are interspersed in the machine. Like other equipment, they play an important role in achieving the goal of the stacking system. In that way, if all sensors work abnormally, it may cause the abnormal operation of the machine system.
In addition, whether the machine works normally or not, mechanical equipment is the foundation. In other words, if the equipment cannot work normally, the stretching robot may have problems such as disordered bag grabbing, no disk available, and unable to transport after grabbing. Electricity is the key and core. Without electricity and air compression, the machine can not operate normally. It is not difficult to see that the key points of normal maintenance of the machine are mechanical equipment and its electricity and air compression, which are directly related to whether the equipment can work orderly, reliably and stably.
